Monitor coloring (heat map) is not displayed.

Issue

The coloring (heat map) of the constructed locus data on the monitor is not displayed.

Answer/Cause

It is not correct that As-built view setting.

Explanation/How to deal

 About display method

• Touch Menu button on the right lower.
• Choose "Project File Settings." 
• Select "Cut Fill" in "As-built View."
  

The coloring data is saved for each project file and is updated only in the direction of excavation.

When the machine is operated at a high speed, or at the edge of the design data, or at the border between TIN and TIN, it may be difficult to apply the color.

*If the machine is over-excavated, the coloring will not be restored, so please work slowly at the boundaries.

The edges of TIN.

　 

The boundary between TINS.