How to get fill results reflected in the Smart Construction Dashboard?

Question

How to get fill results reflected in the Smart Construction Dashboard?

Answer

By switching the setting of the monitor for "As-built Update During Semi-AUTO" to “Cut Fill”, and if you stroke the design surface while semi-automatic is on, the results will be reflected in the Smart Construction Dashboard as fill.

*Please note that some of the “Cut Fill” settings described in this article may not be partially reflected depending on the terrain and the way the machine is operated. If you do not work on fill, it is recommended that you leave the “Cut” setting for semi-automatic operation.

Explanation

How to set on the monitor

Go to "Komatsu Options" in the "Menu" and select "Cut Fill" for "As-built Update During Semi-AUTO".

The coloring of the monitor's results will not be displayed as fill, even if the area was excavated once and then filled. (The monitor does not change from a lower color to a higher color.)

Supplementation

*If construction history data is extracted directly from the monitor, the construction history data (grid data) does not reflect the results of fill.

*SL3 file connection is required to reflect the results in the application, regardless of the embankment results.